Gantry, Step 3: Z-Motor to Plate

Find the Z motor mounting plate (1). Remove the thread protection tube and the delrin nut from the Z-motor. Clean any excess grease from the nut. Attach the thread shafted Z-motor (2) to the plate, using M3-6 bolts (4) and M3 washers (3). Note the direction of the connector.

gantry step3b

  1. Z-motor mounting plate
  2. thread-shafted NEMA17 stepper motor
  3. M3 washer x 4
  4. M3-6 x 4

Previous Next

Back