Y-Bar, Right Roller Plate, Step 5: Belt post

Mount one M5-25 bolt to the plate using two washers and one 0.625″or 18mm spacer on the inside of the plate.

ybar right roller step5b

  1. M5-25
  2. M5 washer x 2, if 0.625″ spacer (see below)
  3. Aluminum spacer, 0.625″ / 18mm steel spacer
  4. M5 washer
  5. M5 nut

Note1: Recently, there has been difficulties in parts purchase. Therefore, the kit may have 0.625″  (15.9mm) aluminium spacers, and the post needs two washers. Alternatively, the spacers  18mm steel; if you have 18mm spacer, don’t install the washers. The type is indicated in the bag label.

Note2: I have shipped a some kits with misprinted labels: If the label reads 0.825″, the bag actually contains 0.625″ spacers. My apologies for any confusion!

Previous Next

Back