I now almost have a realtime-display of the strip situation:
Tomorrow I will add some code to show the real part quantities as well as the part size correct.
Search found 122 matches
- Fri Dec 08, 2017 8:49 pm
- Forum: Ideas and Feature Requests
- Topic: Display available parts in job table
- Replies: 3
- Views: 3613
- Fri Dec 08, 2017 7:06 pm
- Forum: Ideas and Feature Requests
- Topic: Display available parts in job table
- Replies: 3
- Views: 3613
Display available parts in job table
Hi, I just worked a bit on my variant of the software which is a heavily modified version of the rmod-fork. Since I changed the machine also this version will not run on others, but that is no problem here: I changed the jopb table so that I added a new column and draw there a colored bar showing th...
- Mon Nov 27, 2017 9:05 pm
- Forum: OpenPnP software
- Topic: Openpnp
- Replies: 53
- Views: 269287
Re: Openpnp
Uha...I got it!
I added a
(?<Value>\d+)
in the Actuator_READ_REGEX.
Since the tinyG only gives the value without anything else that is enough..
So for the
ACTUATOR_READ_COMMAND you enter $ADC0
ACTUATOR_READ_REGEX you enter (?<Value>\d+)
I added a
(?<Value>\d+)
in the Actuator_READ_REGEX.
Since the tinyG only gives the value without anything else that is enough..
So for the
ACTUATOR_READ_COMMAND you enter $ADC0
ACTUATOR_READ_REGEX you enter (?<Value>\d+)
- Mon Nov 27, 2017 8:59 pm
- Forum: OpenPnP software
- Topic: Openpnp
- Replies: 53
- Views: 269287
Re: Openpnp
Hi, I try to set up vacuum sensing. The docs are a bit disturbing about that, the video in the doc is too old as it seems. I use the command $ADC0, which works. I set up a actuator, and added the ACTUATOR_READ_COMMAND as $ADC0" Then I tried the ACTUATOR_READ_REGEX, but that does not seem to wor...
- Wed Nov 22, 2017 8:11 pm
- Forum: Using the LitePlacer
- Topic: TinyG USB goes on and off if I move an axis by hand
- Replies: 4
- Views: 3270
Re: TinyG USB goes on and off if I move an axis by hand
I just checked your post about the USB camera problems, and downloaded the tool showing all usb connections. I found out that I have 2 hubs on my system, both cams and the TinyG were all on one hub. Now I can connect the cameras on each hub, that would make my connection problems better I guess. Tom...
- Wed Nov 22, 2017 8:08 pm
- Forum: Ideas and Feature Requests
- Topic: Better nozzle with auto change?
- Replies: 94
- Views: 195559
Re: Better nozzle with auto change?
I mill tons of FR4 and Carbon fibre, and have a vacuum outside, so all dust flows out of my house
And..it mills much faster then a laser, and you do not have burnt surfaces.
Here is the dxf file.
And..it mills much faster then a laser, and you do not have burnt surfaces.
Here is the dxf file.
- Wed Nov 22, 2017 11:54 am
- Forum: Ideas and Feature Requests
- Topic: Better nozzle with auto change?
- Replies: 94
- Views: 195559
Re: Better nozzle with auto change?
I will post it. But you cannot laser it from steel as it has to be elastic. I used 1.5mm FR4.
- Wed Nov 22, 2017 8:32 am
- Forum: Ideas and Feature Requests
- Topic: Better nozzle with auto change?
- Replies: 94
- Views: 195559
Re: Better nozzle with auto change?
I had them slip out only a tiny bit, but that caused a jam already as the Z-Axis did not hit exactly. I had some crashes due to that, so I changed it.
- Wed Nov 22, 2017 8:31 am
- Forum: Using the LitePlacer
- Topic: TinyG USB goes on and off if I move an axis by hand
- Replies: 4
- Views: 3270
Re: TinyG USB goes on and off if I move an axis by hand
I now grounded all metal parts of the machine itself, and will see if it gets better today, I have to place the other side of the boards.
- Tue Nov 21, 2017 7:37 pm
- Forum: Using the LitePlacer
- Topic: TinyG USB goes on and off if I move an axis by hand
- Replies: 4
- Views: 3270
TinyG USB goes on and off if I move an axis by hand
I placed a few boards today and hat several connection errors, in the middle of the placement it hanged. Now I foundout that as as soon as I move an axis by hand the USB connection sound of Windows goes off. There seems to get current from the mototrs to the USB connector. I am not sure, but that se...