LitePlacer.com forums

New software release, build date 09.09.2022 Installation file: https://liteplacer.com/Downloads/LitePlacer_install_09_09_2022.exe New features: * Up camera assisted placement. Details here: https://liteplacer.com/up-camera-assisted-placement/ * Video to UI is scaled down to UI resolution (much bette...

First, I don’t use OpenPnP, so I’m just repeating what I’m told. OpenPnP can be used, I have customers doing just that. The machine works; the only issue is that my software and OpenPnP have Z axis direction opposite. Because of this, some people have installed a polarity change switch, so they can ...

Newest version, 24.08.2022: I haven't got much feedback, but most issue fixes and many suggestions are done now. Until something comes up, this will be the release version, once I have had a good change to update the documentation to this (probably next week). Newest changes: -setting machine size s...

I added separate +10 and -10 buttons, these will be in the next release. Thank you for this suggestion, this makes tuning the threshold much easier and user-friendly! (Now why haven't I been smart enough to see that?)

Ah. Your suggestion makes sense.

Which boxes are you referring to?

Newest version 25-07-2022: Fixes issues on homing from other than basic setup page. Nozzle calibration from nozzle setup page is depreciated now; use "Special Options" on "Setup Vision Processing" page. Data backups now go to dated directories.

Note 3: If calibrating all nozzles from Nozzle tab, it seems the vision does not work. However, if I start it for all nozzles and quickly change to the SVP tab and select allow move with nozzle down it seems to go ahead. This can be tricky to get right. If I do each nozzle using 'calibrate current'...

Note 2: In the SVP tab, if a home is required and the up camera is selected, the home does not work. The Home should always use the down camera when looking for the dot. It seems it is using the up camera when looking for the dot. Homing now switches do down camera cleanly on cameras setup and visi...

Quick Note: The big homing button when in the nozzle tab does not appear to work. It just goes red when clicked. This may be by design....if so disabling the button or displaying a pop-up message may be better. It was by design, as the nozzle calibration needs to disable the z axis switches. It now...