Application Start
Version: 1.0.7839.28994, build date: 06/18/2021 16:06:28
Reading C:\LitePlacer\LitePlacer.Appsettings
Basic Setup tab begin
LoadVideoAlgorithms from C:\LitePlacer\LitePlacer.VideoAlgorithms
UpdateVideoProcessing()
BuildFunctionsList:
Loading temp CAD data file
Loading temp job data file
Could not read
http://www.liteplacer.com/Downloads/release.txt, update info not available.
Loading tapes with nozzles data
Reading v2 format file C:\LitePlacer\LitePlacer.TapesData_v2
Loading nozzles data
Reading v2 format file C:\LitePlacer\LitePlacer.NozzlesLoadData_v2
Reading v2 format file C:\LitePlacer\LitePlacer.NozzlesUnLoadData_v2
Reading v2 format file C:\LitePlacer\LitePlacer.NozzlesVisionParameters_v21
Loading nozzle calibration data from C:\LitePlacer\LitePlacer.NozzlesCalibrationData_v3
Connected to serial port COM4
==> M115
<== {"r":{"gc":"M115"},"f":[1,132,5,8387]}
<== {"sr":{"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":0.00,"vel":0.00,"unit":1,"coor":1,"dist":0,"frmo":1,"stat":1}}
Com closing delay:
Done.
Connected to serial port COM4
==> M115
<== {"r":{"gc":"M115"},"f":[1,132,5,8387]}
*** Cnc.Connect(), did not find a supported board.
Startup completed.
B: Clear Err.
Com closing delay:
Done.
Connected to serial port COM4
==> M115
<== {"r":{"gc":"M115"},"f":[1,132,5,8387]}
Com closing delay:
Done.
Connected to serial port COM4
==> M115
<== {"r":{"gc":"M115"},"f":[1,132,5,8387]}
*** Cnc.Connect(), did not find a supported board.
B: Clear Err.
Com closing delay:
Done.
Connected to serial port COM4
==> M115
<== {"r":{"fv":0.970,"fb":440.20,"hp":1,"hv":8,"id":"7U4895-GYX","msg":"SYSTEM READY"},"f":[1,0,0,4710]}
Com closing delay:
Done.
Connected to serial port COM4
==> M115
<== {"r":{"gc":"M115"},"f":[1,132,5,8387]}
<== {"sr":{"posx":0.000,"posy":0.000,"posz":0.000,"posa":0.000,"feed":0.00,"vel":0.00,"unit":1,"coor":1,"dist":0,"frmo":1,"stat":1}}
*** Cnc.Connect(), did not find a supported board.