[Sold] LitePlacer in Montreal, Canada
Posted: Thu Jun 15, 2023 3:53 am
Hi, I'm selling my LitePlacer - ready for pick-up in right now near Montreal. My last production run is complete.
It is modified to be 4ft wide to accomodate more front-loading feeders.
Electrical is a-okay, all cables are clearly labeled and respect the original color coding, so they'll be easy to unplug and replug.
PnP is assembled on a wood fiber board with anti-static tape, screwed onto a recycled desk. Easy to disassemble, transport and reassemble.
Reliably places 0.5mm pitch QFN with OpenPnP.
Only thing to note is that the camera holders tends to deform with time due to weight on the plastic, and the camera precise calibrations needs to be done weekly, which takes around 15-20 minutes.
I have other tools for sale too: modified T-962A oven and ultrasound cleaning bath (about 4L capacity).
-Marc
It is modified to be 4ft wide to accomodate more front-loading feeders.
Electrical is a-okay, all cables are clearly labeled and respect the original color coding, so they'll be easy to unplug and replug.
PnP is assembled on a wood fiber board with anti-static tape, screwed onto a recycled desk. Easy to disassemble, transport and reassemble.
Reliably places 0.5mm pitch QFN with OpenPnP.
Only thing to note is that the camera holders tends to deform with time due to weight on the plastic, and the camera precise calibrations needs to be done weekly, which takes around 15-20 minutes.
I have other tools for sale too: modified T-962A oven and ultrasound cleaning bath (about 4L capacity).
-Marc
- pnp_45.jpg (5.44 MiB) Viewed 5684 times
- pnp_top.jpg (5.12 MiB) Viewed 5684 times
- pnp_electrical.jpg (4.15 MiB) Viewed 5684 times