Gantry Front Plate, Step 3: Z-Bar Guide Wheels, Right Side

Turn the plate around and attach two V-wheels to the holes shown. Note the use of 0.25″ spacers. For any play between the nut and the plate hole, tighten the bolt away from the big hole. Make sure the wheels turn smoothly.

gantry front plate step3

  1. M5-30 x 2
  2. M5 washer x 2
  3. 0.25″ spacers x 2
  4. M5 washer x 2
  5. V-wheel subassembly x 2
  6. M5 washer x 2
  7. M5 nut x 2

Previous Next

Back